Quickie Groove Technické informace stáhnout pdf (Strana 48)

48 Quickie Groove

.EMS

3. FIT FRONT TIE-DOWN BRACKET, (Fig.13.42).

Secure front tie-down to hanger screw location with M8 x 45

screw (and nut, if originally fitted)

4. FIT FRONT TIE-DOWN BRACKET, (Fig.13.43).

Secure rear of front tie-down to seat tube with M6 x 40 bolt,

washer and nut. Ensure washer fitted in front of tie-down (as

shown)

5. FINAL ASSEMBLY, (Fig.13.44).

Replace lamps (if fitted)

Apply tie-down label (correct orientation) .Repeat process for

opposite side of chair

13.15 Front Tie-down xing position onto Comfort Seating

Systems – Kit P/N 015544

Tools required to fit front tie-downs to Comfort Seating Systems,

only with lift, tilt or lift and tilt module:

1. Take tie down label from ki

t, (Fig.13.45)

2. FIT TIE DOWN LABEL, (Fig.13.46).

Apply tie-down label at the width adjustable hanger receiver.

Repeat process for opposite side of chair.

3. REMOVE OLD LABEL, MWD, (Fig.13.47).

Remove tie-down label from the bracket (MWD) only when

you have lift, tilt or lift&tilt module

Fig. 13.42

Fig. 13.43

Fig. 13.44

Fig. 13.45

Fig. 13.46

Fig. 13.47

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 65 66

Žádné komentáře

Quickie Groove Technické informace Strana 48