
10.4 Centre bar mount control (R-net)
WARNING!
Make sure that the controller is fixed securely to the centre
bar.
Always turn off the power to the controller before moving the
controller out of the way.
10.5 Tray mount control (R-net)
WARNING!
The maximum weight allowed for the tray is 2.5kg.•
Do not overload the tray; this could cause the tray to break •
or could cause the chair to become unstable.
Always turn off the power to the controller before moving •
the tray out of the way.
Do not leave lit cigarettes or other heat sources on the tray •
as this could cause the tray to deform and mark.
Ensure that all extremities and clothing are free when •
positioning the tray for use.
Ensure that you always have comfortable access to the •
controls whilst the chair is moving and make sure that
there is nothing on the tray that could interfere with your
control of the chair.
10.6 Swing-away tray mounted centre control (R-net)
The swing-away tray mounted centre control enables the hand
control to be flipped over, providing a flat surface when the tray
is required and back around when the user requires access to
the hand control
NOTE: All warnings for the flip up version are the same as
the normal version (section 10.4 above) with the following
additional warnings:
WARNING!
Make sure that the controller is turned off before it is flipped
over
NOTE: Be aware that when the controller is flipped to the
underside of the tray that driving will be inhibited for the user’s
safety.
Centre bar mount with R-net Control
Please refer to the R-net Owner’s Manual for details
of R-net hand control functions.
10.7 Forus control (R-net)
WARNINGS!
Ensure that you set the speed of the forus control to a speed •
that you can comfortably follow.
Ensure that you always have comfortable access to the •
controls whilst the chair is moving and make sure that the
controller is fixed securely to the chair.
It is important that the joystick boot is replaced if it is torn •
or brittle; failing to do so could cause substance damage to
the controller and unexpected movement of the chair.
Always turn off the power to the controller when leaving •
the user in the chair.
Do not replace the joystick knob with any unauthorised •
item. It may cause hazardous operation and loss of control
of the chair.
Do not hang any items on the handles of the forus control.•
The forus attendant control is a mechanical device that translates
mechanical attendant movements into joystick movements on a
regular remote control. (Fig 10.3)
The forus attendant control operates with R-net controls only.
Forus with R-net Control
Please refer to the R-net Owner’s Manual for details
of R-net hand control functions.
After switching on the hand control, the forus attendant
control is ready to use. Pushing the handle downwards drives
the wheelchair backwards, pushing the handle upwards drives
the chair forwards. A left or right push drives the chair in the
respective direction.
Fig.10.3
Adjustment knob
Emergency stop
button
Komentáře k této Příručce