Quickie Groove Technické informace stáhnout pdf (Strana 17)

Quickie Groove 17

.EMS

4.35 Lap strap

The 5 cm (2“) Aircraft Buckle

lap strap. (Fig. 4.10).

The 5 cm (2”) Aircraft Padded

Lap strap. (Fig. 4.11)

The lap strap fitted for a right-

handed user. (Fig. 4.12)

The lap strap fitted for a left-

handed user. (Fig. 4.13)

Place the strap loosely across the

seat with the opening end of the

buckle facing to the right for a

left-handed person and to the left

for a right-handed person. (Fig.

4.14)

Pass the other ends of the strap

through the gap between the

backrest posts and the backrest

upholstery as shown above. (Fig.

4.15)

Feed the bracket ends of the

straps under the backrest brace

bar as shown. Ensure that the

adjuster buckles can be accessed

and the strap is not twisted. (Fig.

4.16)

Pass the bolt through the plain

washer and strap bracket. (Fig.

4.17)

Place a saddle washer on the bolt

(Fig. 4.18).

Pass the bolt through the seat

frame. Mount as shown above

for the 36-46cm, (14”-18”), seat

depth. Mount the bolt the other

way round, with the head on the

inside, for seat depths greater

than 51cm, (20”), to avoid a

clash with the back post bracket

(Fig. 4.19)

Place the other saddle washer on

the end of the bolt and against

the frame. Fit the plain washer

and nut. Tighten using a 4.0mm

Allen key and 10.0mm spanner

(Fig. 4.20).

Adjust the lap strap to suit,

leaving no more than a hand’s

width gap for comfort and safety.

(Fig. 4.21).

The hand clearance should be

tight and not allow large gaps.

Generally, the lap strap should be fixed

so that the straps sit at an angle of

approximately 45° (Fig. 4.22), and when

correctly adjusted should not allow user

to slip down in the seat.

DANGER!

Always make sure that the lap strap is correctly secured and •

adjusted prior to use.

Too loose a strap could cause the user to slip down and •

cause serious injury.

Check lap strap and securing components at regular intervals •

for any signs of fray or damage. Replace if necessary

When servicing, check for correct operation of the release •

buckle and for any signs of wear on the material or plastic

brackets

NOTES:

1. Standard Sling - Lap strap movement is restricted by

upholstery

2. Contoured back - Use universal bottom bracket as per recline

back method

Fig.

Fig.4.11

Fig. 4.12

Fig. 4.13

Fig.4.18

Fig. 4.19

Fig.4.20

Fig. 4.21

Fig. 4.14

Fig. 4.15

Fig.4.16

Fig. 4.17

Fig.4.22

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 65 66

Komentáře k této Příručce

Žádné komentáře

Quickie Groove Technické informace Strana 17

Komentáře k této Příručce

Související produkty a manuály pro ne Quickie Groove