Quickie Pulse Servisní příručka stáhnout pdf (Strana 71)

PULSE 6 SERVICE MANUAL

PAGE 8.5

SEPT 2011SUNRISE MEDICAL

Back-rest Angle Adjustment

1 Make sure you have the right tools- 5mm

Hex Key, and 13mm open end wrench and/or

ratchet.

Section 8

fig. 8.5.2

fig. 8.5.1

2. Loosen the 2 BHCS bolts "A" (figure 8.5.1)

with a 5mm Hex key and use 13mm open end

Wrench for the nuts "B".

3. To make a small angle change to one of four

possible settings, (-4°, 0, 4°, 8°) pull bolt out and

change the position of the front edge bracket.

(figure 8.5.2) Then re-attach the nut and tighten

bolt into place. make sure plastic saddles and

washers are in place behind the part.

Note: Take care not to lose the saddles, or

plastic washers between Bracket and seat rail

while performing the next step.

-4°

0°

4°

8°

1 2 ... 66 67 68 69 70 71 72

Žádné komentáře

Quickie Pulse Servisní příručka Strana 71